Quilting Knowledge Series (Part 2)

How to properly control the tension of the upper thread?

When removing the thread, be sure to pass through the thread clamp on the upper thread clamp. The thread clamp cannot be adjusted too tight. When you need to adjust the tightness of the upper thread, you cannot pull the upper thread directly. You must control the tightness of the upper thread through the thread clamp on the control device; when adjusting, it should not be too tight or too loose, and there should be no jamming, otherwise it will cause jumpers. Or disconnected.

How to draw a pattern?

When drawing a pattern for a quilting machine, we can use professional pattern drawing software, but the exported format must be HFP. How to enlarge or reduce the size when drawing a floral pattern? In "Edit Pattern", open "Scale Entire Pattern", and based on our needs, click on the pop-up box's "millimeters" or "inches" option, then add the X and Y parameters according to our needs, and click "OK" after entering.

How to troubleshoot the cause of abnormal noise in a quilting machine?

First, check whether the frequently worn parts are lacking oil, and add some machine oil or grease to the dryer areas; then check whether there is any clearance in the bearings of various components; also carefully observe whether the accessories and wear parts are excessively worn, and replace them timely if discovered.